Share:
Specifications
SKU: 11198228
IC NAND/AND GATE 8-IN 14-DIP
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VDD | Operating | 3.0 | - | 18 | V |
| Input Voltage (High) | VIH | - | 3.5 | - | VDD | V |
| Input Voltage (Low) | VIL | - | 0 | - | 1.5 | V |
| Output Voltage (High) | VOH | IO = -1mA | 2.4 | - | VDD - 0.1 | V |
| Output Voltage (Low) | VOL | IO = 1mA | 0 | - | 0.1 | V |
| Input Current (High) | IIH | VI = VDD | -1 | - | 20 | μA |
| Input Current (Low) | IIL | VI = 0V | -1 | - | 20 | μA |
| Output Current (Source) | IOH | VO = VDD - 1.5V | -1 | - | 10 | mA |
| Output Current (Sink) | IOL | VO = 1.5V | 1 | - | 10 | mA |
| Propagation Delay Time | tpd | VDD = 5V, fL = 1kHz | - | 25 | - | ns |
| Power Dissipation | PD | - | - | - | 500 | mW |
Instructions for Using the CD4068BE:
Power Supply:
- Ensure the supply voltage (VDD) is within the operating range of 3.0V to 18V.
- Connect the ground (GND) pin to a stable 0V reference.
Input Signals:
- Apply input signals that meet the specified high (VIH) and low (VIL) voltage levels.
- Keep input currents within the specified limits to avoid damaging the device.
Output Signals:
- The output signals will be driven to either VOH (high) or VOL (low) depending on the logic state.
- Ensure the load connected to the output can handle the specified source (IOH) and sink (IOL) currents.
Propagation Delay:
- The propagation delay time (tpd) is the time it takes for the output to change state after the input changes. This is typically 25ns at VDD = 5V.
Power Dissipation:
- Do not exceed the maximum power dissipation (PD) of 500mW to prevent overheating and potential damage to the device.
Handling:
- Handle the CD4068BE with care to avoid static discharge, which can damage the internal circuits.
- Store and transport the device in anti-static packaging.
Operating Temperature:
- Ensure the device operates within the recommended temperature range to maintain reliable performance.
Testing:
- Use a multimeter to verify the supply voltage and output voltages to ensure proper operation.
- Test the propagation delay using a signal generator and oscilloscope if necessary.
By following these instructions, you can ensure the CD4068BE operates correctly and reliably in your circuit.
(For reference only)Inquiry - CD4068BE
