Share:
Specifications
SKU: 11199386
You deserve it
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | - | 1.8 | 2.5 | 5.5 | V |
| Input Low Voltage | VIL | VCC = 4.5V to 5.5V | - | - | 0.8 | V |
| Input High Voltage | VIH | VCC = 4.5V to 5.5V | 2.0 | - | - | V |
| Output Low Voltage | VOL | IOL = 8 mA, VCC = 4.5V to 5.5V | - | - | 0.1 | V |
| Output High Voltage | VOH | IOH = -4 mA, VCC = 4.5V to 5.5V | 2.4 | - | - | V |
| Input Leakage Current | IIL | VCC = 4.5V to 5.5V | -1 | - | 1 | μA |
| Output Leakage Current | IOL | VCC = 4.5V to 5.5V | -1 | - | 1 | μA |
| Propagation Delay Time | tpd | VCC = 4.5V to 5.5V, VI = VCC/2 | - | 6 | - | ns |
| Power Consumption per Gate | Pmax | VCC = 4.5V to 5.5V | - | - | 1 | mW |
Instructions for Use
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 1.8V to 5.5V.
- Connect the ground (GND) pin to a stable reference potential.
Input Signals:
- Apply input signals (VIL, VIH) that meet the specified voltage levels for logic low and high.
- Ensure input signals do not exceed the supply voltage (VCC) or go below ground (GND).
Output Signals:
- The output signals (VOL, VOH) will be within the specified voltage levels for logic low and high.
- Ensure the load connected to the output does not exceed the maximum current ratings.
Propagation Delay:
- The propagation delay time (tpd) is the time it takes for the output to change state after the input changes.
- Typical propagation delay is 6 ns at VCC = 4.5V to 5.5V.
Power Consumption:
- The power consumption per gate is typically very low, with a maximum of 1 mW at VCC = 4.5V to 5.5V.
Handling Precautions:
- Handle the IC with care to avoid static damage.
- Use proper decoupling capacitors (e.g., 0.1 μF) near the power supply pins to reduce noise and ensure stable operation.
Storage:
- Store the IC in a dry, cool place to prevent moisture damage.
- Follow recommended storage conditions as specified in the datasheet.
Inquiry - 74AHC08D
