Share:
Specifications
SKU: 11202765
| Parameter | Description | Value |
|---|---|---|
| Model | Full Model Name | HRS1H-S-DC12V |
| Type | Relay Type | Latching Relay |
| Supply Voltage | Operating Voltage | DC 12V |
| Coil Resistance | Coil Resistance (Ω) | 300 ± 15% |
| Pick-up Voltage | Minimum Pick-up Voltage (V) | ≤ 8.4V |
| Drop-out Voltage | Maximum Drop-out Voltage (V) | ≤ 1.2V |
| Contact Form | Number of Poles and Throws | SPDT |
| Contact Rating | Contact Current (A) | 10A @ 250VAC |
| Contact Resistance | Contact Resistance (mΩ) | ≤ 50 mΩ |
| Insulation Resistance | Insulation Resistance (MΩ) | ≥ 100 MΩ |
| Dielectric Strength | Dielectric Strength (VAC) | 1500VAC for 1 minute |
| Mechanical Life | Mechanical Life (Cycles) | 100,000 cycles |
| Electrical Life | Electrical Life (Cycles) | 10,000 cycles |
| Operating Temperature | Operating Temperature Range (°C) | -40 to +85°C |
| Storage Temperature | Storage Temperature Range (°C) | -40 to +125°C |
| Weight | Weight (g) | 15 g |
| Dimensions | Dimensions (L x W x H) (mm) | 17.5 x 12.2 x 10.5 |
Instructions
Power Supply:
- Ensure the supply voltage is within the specified range (DC 12V).
- Connect the relay coil to the power supply using the appropriate terminals.
Coil Operation:
- Apply the pick-up voltage (≤ 8.4V) to activate the relay.
- Remove the voltage or apply the drop-out voltage (≤ 1.2V) to deactivate the relay.
Contact Connection:
- Connect the load to the common (COM) and normally open (NO) or normally closed (NC) contacts as required.
- Ensure the load current does not exceed the contact rating (10A @ 250VAC).
Environmental Conditions:
- Operate the relay within the specified temperature range (-40 to +85°C).
- Store the relay in a dry environment within the storage temperature range (-40 to +125°C).
Maintenance:
- Regularly inspect the relay for any signs of wear or damage.
- Ensure the contacts are clean and free from corrosion.
Safety Precautions:
- Do not exceed the maximum ratings for voltage, current, and temperature.
- Use appropriate fuses or circuit breakers to protect against overcurrent conditions.
- Follow all local electrical codes and safety standards.
Inquiry - HRS1H-S-DC12V
