Share:
Specifications
SKU: 11203437
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | 817B |
| Type | Device Type | Optocoupler |
| Package | Housing Style | DIP-4 |
| Input Current (IF) | Forward Current through LED | 10 mA (Max) |
| Input Voltage (VF) | Forward Voltage across LED | 1.2 V (Typical) at IF = 20 mA |
| Output Current (IC) | Collector Current | 50 mA (Max) |
| Collector-Emitter Voltage (VCE) | Maximum Voltage between Collector and Emitter | 70 V (Max) |
| Isolation Voltage (VIORM) | Isolation Voltage between Input and Output | 5000 Vrms (Min) |
| CTR (Current Transfer Ratio) | Ratio of Output Current to Input Current | 50% to 600% at IF = 5 mA, VCE = 5 V |
| Operating Temperature (Toper) | Operating Temperature Range | -40°C to +105°C |
| Storage Temperature (Tstg) | Storage Temperature Range | -65°C to +150°C |
| Rise Time (tr) | Time for Output to Rise from 10% to 90% of Final Value | 2 μs (Max) |
| Fall Time (tf) | Time for Output to Fall from 90% to 10% of Initial Value | 2 μs (Max) |
Instructions for Use:
Mounting:
- Ensure the device is mounted on a PCB with proper clearance to avoid short circuits.
- Follow the recommended soldering profile to prevent thermal damage.
Power Supply:
- Connect the input (LED side) to a suitable current-limited power supply.
- Ensure the output (transistor side) is connected to a load that does not exceed the maximum collector current (IC).
Signal Handling:
- The optocoupler provides electrical isolation between the input and output. Use it to interface different voltage levels or to protect sensitive circuits.
- Ensure the input signal is within the specified range to avoid damaging the LED.
Temperature Management:
- Operate the device within the specified temperature range to ensure reliable performance.
- Provide adequate cooling if the device will be operating at high temperatures or high currents.
Testing:
- Before final assembly, test the optocoupler using a known good circuit to verify functionality.
- Check the CTR to ensure it falls within the specified range.
Storage:
- Store the device in a dry, cool place away from direct sunlight and corrosive environments.
- Handle with care to avoid mechanical damage.
Inquiry - 817B
