Instructions for Use:

1. Mounting: Ensure the SMAJ58A is mounted on a PCB with appropriate clearance to prevent short circuits.
2. Soldering: Use a soldering iron with a temperature not exceeding 260°C for a duration not exceeding 10 seconds.
3. Polarity: Pay attention to the polarity of the device. The cathode (K) is usually marked with a band or dot.
4. Thermal Management: Ensure adequate heat dissipation if the device will be subjected to high power pulses.
5. Voltage Handling: Do not exceed the maximum reverse standoff voltage (VBR) to avoid damage.
6. Environmental Conditions: Operate the device within the specified operating and storage temperature ranges to ensure reliability.
7. Storage: Store the device in a dry, cool place away from direct sunlight and corrosive environments.