Instructions for Use:

1. Supply Voltage: Ensure the supply voltage is within the range of 2.7V to 5.5V to avoid damage to the component.
2. Operating Current: The typical operating current is 25mA. Do not exceed the peak current of 60mA to prevent overheating.
3. Forward Voltage: The forward voltage typically ranges from 3.2V to 3.6V. Use this information to design your circuit appropriately.
4. Reverse Voltage: The component can withstand up to 5V in reverse bias without damage.
5. Viewing Angle: The full viewing angle is 120°, ensuring wide visibility.
6. Luminous Intensity: The luminous intensity ranges from 400 to 1200 mcd, depending on the operating conditions.
7. Wavelength: The emitted light has a wavelength between 465nm and 475nm, which corresponds to blue light.
8. Power Dissipation: The maximum power dissipation is 150mW. Ensure proper heat management to avoid exceeding this limit.
9. Operating Temperature: The component is designed to operate within a temperature range of -40°C to 85°C.
10. Storage Temperature: Store the component in an environment with temperatures ranging from -40°C to 100°C to maintain its performance.

Additional Notes:

• Always use appropriate current-limiting resistors to protect the LED from excessive current.
• Ensure proper heat sinking if the LED will be operated at high currents or in high-temperature environments.
• Follow the recommended PCB layout guidelines to ensure optimal performance and reliability.