Share:
Specifications
SKU: 11211668
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Forward Voltage | VF | - | 1.8 | 2.2 | V @ 20mA | Voltage drop across the LED when forward biased. |
| Reverse Voltage | VR | -5 | - | 5 | V | Maximum reverse voltage the LED can withstand. |
| Continuous Forward Current | IF | - | 20 | 25 | mA | Maximum continuous current through the LED. |
| Peak Forward Current | IF(peak) | - | - | 160 | mA | Maximum peak current through the LED (pulse width ≤ 1 ms). |
| Power Dissipation | PT | - | - | 100 | mW | Maximum power dissipation of the LED. |
| Operating Temperature | TA | -40 | - | 85 | °C | Ambient temperature range for operation. |
| Storage Temperature | TSTG | -40 | - | 100 | °C | Temperature range for storage. |
| Wavelength | λd | 620 | - | 645 | nm | Dominant wavelength of emitted light. |
| Viewing Angle | θv | - | 12 | 18 | ° | Angle at which the luminous intensity is half the maximum. |
| Luminous Intensity | Iv | - | 350 | 700 | mcd | Luminous intensity at 20 mA. |
Instructions:
Mounting and Handling:
- Handle the BAS32L with care to avoid mechanical damage.
- Ensure proper alignment during mounting to prevent short circuits or improper connections.
Electrical Connections:
- Connect the anode (longer lead) to the positive supply and the cathode (shorter lead) to the ground.
- Use a current-limiting resistor to ensure the forward current does not exceed the maximum ratings.
Thermal Management:
- Ensure adequate heat dissipation if operating near the maximum power dissipation limit.
- Avoid prolonged exposure to high temperatures to prevent degradation of performance and lifespan.
Environmental Considerations:
- Store the BAS32L in a dry, cool environment within the specified storage temperature range.
- Protect from static electricity and other environmental hazards.
Testing:
- Test the LED using a constant current source to avoid exceeding the maximum current ratings.
- Measure the forward voltage and luminous intensity to ensure the LED is functioning correctly.
Safety:
- Do not stare directly at the LED when it is powered on, as it can cause eye strain or discomfort.
- Follow all relevant safety guidelines and regulations when handling and using the LED.
Inquiry - BAS32L
