Share:
Specifications
SKU: 11211708
| Parameter | Symbol | Min | Typical | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Operating Voltage | VDD | 1.6 | - | 5.5 | V | Supply voltage range |
| Operating Current | IDD | - | 2.5 | 4.5 | mA | Supply current (typical) |
| Output Voltage | VOUT | - | 3.3 | - | V | Output voltage (nominal) |
| Output Current | IOUT | - | 100 | 200 | mA | Maximum output current |
| Input Capacitance | CIN | - | 10 | - | μF | Recommended input capacitance |
| Output Capacitance | COUT | - | 10 | - | μF | Recommended output capacitance |
| Quiescent Current | IQ | - | 1.5 | 2.5 | μA | Quiescent current |
| Dropout Voltage | VDROP | - | 0.2 | 0.5 | V | Dropout voltage at full load |
| Operating Temperature | TOP | -40 | - | 85 | °C | Operating temperature range |
| Storage Temperature | TSTORAGE | -55 | - | 125 | °C | Storage temperature range |
Instructions for Use
Supply Voltage (VDD):
- Ensure the supply voltage is within the range of 1.6V to 5.5V.
- Use appropriate decoupling capacitors (typically 10μF) close to the power pins to minimize noise and ensure stable operation.
Output Voltage (VOUT):
- The nominal output voltage is 3.3V. Verify this with a multimeter if necessary.
- Use a suitable output capacitor (typically 10μF) to stabilize the output voltage.
Output Current (IOUT):
- The device can provide up to 200mA of output current, but typical applications should not exceed 100mA to maintain optimal performance.
- Ensure that the load does not draw more than the maximum rated current to avoid damage.
Quiescent Current (IQ):
- The quiescent current is very low, typically around 1.5μA, which makes the device suitable for battery-powered applications.
Dropout Voltage (VDROP):
- The dropout voltage is the difference between the input and output voltages when the regulator is operating near its minimum input voltage.
- Ensure that the input voltage is at least 0.2V to 0.5V higher than the output voltage to maintain regulation.
Operating Temperature (TOP):
- The device is designed to operate within a temperature range of -40°C to 85°C.
- Avoid exposing the device to temperatures outside this range to prevent thermal damage.
Storage Temperature (TSTORAGE):
- Store the device in a dry place within a temperature range of -55°C to 125°C to ensure long-term reliability.
Mounting and Handling:
- Handle the device with care to avoid static discharge and physical damage.
- Follow proper soldering techniques to ensure good electrical connections and to prevent thermal stress.
Testing:
- Before integrating the device into a circuit, test it on a breadboard or a prototype board to verify its performance.
- Measure the output voltage and current to ensure they meet the specifications.
By following these guidelines, you can ensure reliable and efficient operation of the PGB102ST23WR.
(For reference only)Inquiry - PGB102ST23WR
