Instructions for NC7SZ126P5X

1. Supply Voltage (V_CC):

   • Ensure the supply voltage is within the range of 1.65V to 3.6V.
   • Do not exceed the maximum supply voltage to avoid damaging the device.

2. Output Voltage Levels:

   • The output high voltage (V_OH) should be at least 0.95 times the supply voltage.
   • The output low voltage (V_OL) should be no more than 0.05 times the supply voltage.

3. Input Voltage Levels:

   • The input high voltage (V_IH) should be at least 0.7 times the supply voltage.
   • The input low voltage (V_IL) should be no more than 0.3 times the supply voltage.

4. Propagation Delay Time (t_pd):

   • The typical propagation delay time is 5ns, with a maximum of 8ns. This is the time it takes for the output to respond to a change in the input.

5. Power Consumption (P_tot):

   • The typical power consumption is 0.1mW. Ensure that the power supply can handle this load.

6. Operating Temperature (T_A):

   • The device is designed to operate within a temperature range of -40°C to 85°C. Avoid operating outside this range to prevent performance degradation or damage.

7. Storage Temperature (T_STG):

   • When storing the device, ensure the temperature is between -65°C and 150°C to maintain its integrity.

8. Handling and Installation:

   • Handle the device with care to avoid static discharge, which can damage sensitive components.
   • Follow standard soldering and installation procedures to ensure proper connection and functionality.

9. Testing:

   • Before deploying the device in a circuit, test it under the specified conditions to ensure it meets the required performance parameters.

10. Compliance:

    • Ensure that the device complies with all relevant industry standards and regulations for your specific application.