Instructions for Use:

1. Power Supply:

   • The NJM3403AV-TE1 operates with a supply voltage ranging from 2.7V to 5.5V.
   • Ensure the power supply is stable and within the specified range to avoid damage or malfunction.

2. Quiescent Current:

   • The typical quiescent current is 6mA at a supply voltage of 5V. This value should be considered when designing the power supply circuit.

3. Output Voltage Swing:

   • The output voltage swing is typically between 0.1V and 4.4V when the load resistance is 600Ω and the supply voltage is 5V. Ensure that the load does not exceed these limits to prevent distortion.

4. Input Bias Current:

   • The input bias current is typically 2nA at a supply voltage of 5V. This is important for high-impedance sources to minimize loading effects.

5. Input Offset Voltage:

   • The input offset voltage is typically 2mV at a supply voltage of 5V. This can affect the accuracy of the amplifier, especially in precision applications.

6. Slew Rate:

   • The slew rate is typically between 0.5V/μs and 1.0V/μs at a supply voltage of 5V. This parameter is crucial for handling high-frequency signals without distortion.

7. Common Mode Rejection Ratio (CMRR):

   • The CMRR is typically between 60dB and 80dB at a supply voltage of 5V. Higher CMRR values indicate better rejection of common-mode signals.

8. Power Supply Rejection Ratio (PSRR):

   • The PSRR is typically between 60dB and 80dB at a supply voltage of 5V. Higher PSRR values indicate better rejection of power supply noise.

9. Operating Temperature:

   • The operating temperature range is from -40°C to 85°C. Ensure that the device is used within this range to maintain reliable operation.

10. Storage Temperature:

    • The storage temperature range is from -65°C to 150°C. Store the device in a dry, cool place to prevent damage.

11. Handling Precautions:

    • Handle the device with care to avoid static discharge, which can damage the internal components.
    • Follow proper soldering techniques and avoid excessive heat during assembly.

12. Circuit Design:

    • Use appropriate decoupling capacitors (e.g., 0.1μF and 10μF) close to the power supply pins to filter out noise and ensure stable operation.
    • Ensure proper grounding and signal routing to minimize interference and crosstalk.

By following these parameters and instructions, you can ensure optimal performance and reliability of the NJM3403AV-TE1 in your application.