Share:
Specifications
SKU: 11220785
IC TRANSCEIVER FULL 2/2 16DIP
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Operating Voltage | VCC | 4.75 | 5 | 5.25 | V | Supply voltage range |
| Input Voltage Range | VIN | 0 | - | 5 | V | Maximum input voltage |
| Output Current | IOUT | - | 10 | 30 | mA | Maximum output current |
| Input Capacitance | CIN | - | 100 | - | pF | Input capacitance |
| Output Capacitance | COUT | - | 100 | - | pF | Output capacitance |
| Line Driver Output Impedance | ZO | - | 100 | - | Ω | Characteristic impedance of line driver |
| Differential Output Voltage | VOD | 0.8 | 1 | 1.2 | V | Differential output voltage |
| Common-Mode Output Voltage | VOCM | 2.4 | 2.5 | 2.6 | V | Common-mode output voltage |
| Propagation Delay | tPD | 4 | 5 | 6 | ns | Propagation delay from input to output |
| Skew | tSKEW | - | 0.5 | 1 | ns | Maximum skew between differential outputs |
| Power Consumption | ICC | - | 1.5 | - | mA | Typical power consumption at 5V supply |
| Operating Temperature | Toper | -40 | - | 85 | °C | Operating temperature range |
| Storage Temperature | Tstg | -65 | - | 150 | °C | Storage temperature range |
Instructions for Use:
Supply Voltage (VCC):
- Ensure the supply voltage is within the range of 4.75V to 5.25V.
- Use a stable power source to avoid fluctuations that could affect performance.
Input and Output Capacitors:
- Place 100pF capacitors close to the input and output pins to stabilize the circuit and reduce noise.
- Ensure the capacitors are of high quality and suitable for the operating frequency.
Differential Output Configuration:
- Connect the differential outputs to the appropriate load with a characteristic impedance of 100Ω.
- Ensure the common-mode output voltage (VOCM) is set to 2.5V for optimal performance.
Propagation Delay and Skew:
- The propagation delay (tPD) is typically 5ns, but can vary between 4ns and 6ns.
- The maximum skew (tSKEW) between differential outputs is 1ns, ensuring minimal timing discrepancies.
Power Consumption:
- The typical power consumption is 1.5mA at a 5V supply. Ensure the power supply can handle this current draw.
Temperature Considerations:
- The device operates within a temperature range of -40°C to 85°C.
- Store the device in an environment where the temperature does not exceed -65°C to 150°C.
Handling and Installation:
- Handle the device with care to avoid static damage.
- Follow standard surface mount technology (SMT) procedures for installation and soldering.
By adhering to these parameters and instructions, you can ensure reliable and efficient operation of the MAX202CPE.
(For reference only)Inquiry - MAX202CPE
