Share:
Specifications
SKU: 11221417
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | UPA1601GS |
| Type | Device Type | Power MOSFET |
| Package | Package Type | TO-220 |
| VDS (Max) | Drain-to-Source Voltage | 60V |
| VGS (Max) | Gate-to-Source Voltage | ±20V |
| ID (Max) | Continuous Drain Current | 16A |
| Ptot (Max) | Total Power Dissipation | 115W |
| RDS(on) | On-State Resistance at VGS = 10V | 4.5mΩ |
| fT | Transition Frequency | 3.5MHz |
| QG | Gate Charge | 59nC |
| QGD | Gate-Drain Charge | 18nC |
| QGS | Gate-Source Charge | 10nC |
| Tj (Max) | Junction Temperature | 175°C |
| Tstg | Storage Temperature Range | -55°C to 150°C |
Instructions for Use
Handling Precautions:
- Handle the UPA1601GS with care to avoid damage to the leads and body.
- Use proper ESD (Electrostatic Discharge) protection to prevent damage from static electricity.
Mounting:
- Ensure the heatsink is properly attached to the device to maintain optimal thermal performance.
- Use a thermal compound between the device and the heatsink to enhance heat dissipation.
Soldering:
- Solder the device within the recommended temperature range of 260°C for no more than 10 seconds per lead.
- Allow the device to cool naturally after soldering to avoid thermal shock.
Electrical Connections:
- Connect the drain, source, and gate terminals correctly to avoid short circuits or incorrect operation.
- Use appropriate gate drive circuits to ensure the MOSFET switches efficiently and safely.
Operating Conditions:
- Do not exceed the maximum ratings specified in the parameter table.
- Operate the device within the recommended operating conditions to ensure reliability and longevity.
Storage:
- Store the UPA1601GS in a dry, cool place away from direct sunlight and sources of heat.
- Keep the devices in their original packaging until ready for use to protect them from environmental damage.
Inquiry - UPA1601GS
