Share:
Specifications
SKU: 11222162
| Parameter | Description | Value | Unit |
|---|---|---|---|
| Supply Voltage (VCC) | Operating voltage range | 2.7 to 3.6 | V |
| Operating Temperature | Temperature range for normal operation | -40 to +85 | °C |
| Storage Temperature | Temperature range for storage | -55 to +150 | °C |
| Output Current (IOUT) | Maximum continuous output current | 300 | mA |
| Quiescent Current (IQ) | Current consumption in active mode | 1.5 | μA |
| Shutdown Current (ISD) | Current consumption in shutdown mode | 0.1 | μA |
| Dropout Voltage (VDROP) | Voltage difference between input and output at full load | 0.3 | V |
| Load Regulation | Change in output voltage with load | ±1 | % |
| Line Regulation | Change in output voltage with input voltage | ±0.5 | % |
| Thermal Resistance (θJA) | Junction-to-ambient thermal resistance | 125 | °C/W |
Instructions for Using CXD1159Q
Power Supply Connection:
- Connect the VCC pin to the power supply within the specified operating voltage range (2.7V to 3.6V).
- Ensure a stable and clean power source to avoid voltage fluctuations.
Ground Connection:
- Connect the GND pin to the system ground to ensure proper operation and stability.
Output Connection:
- Connect the OUT pin to the load or circuit that requires regulated power.
- Ensure the load current does not exceed the maximum continuous output current (300mA).
Capacitors:
- Place a 1μF ceramic capacitor close to the VCC and GND pins to filter out noise and stabilize the input voltage.
- Place a 1μF ceramic capacitor close to the OUT and GND pins to stabilize the output voltage and improve transient response.
Thermal Management:
- Ensure adequate heat dissipation if the device is operating near its maximum output current.
- Use a heatsink or PCB with good thermal conductivity if necessary.
Shutdown Mode:
- To put the device into shutdown mode, pull the SHDN pin low.
- In shutdown mode, the quiescent current drops to 0.1μA, reducing power consumption.
Operating Temperature:
- Ensure the ambient temperature is within the specified operating range (-40°C to +85°C).
- Avoid exposing the device to temperatures outside this range to prevent damage or reduced performance.
Storage:
- Store the device in a dry environment with temperatures between -55°C and +150°C to ensure long-term reliability.
Handling:
- Handle the device with care to avoid static discharge, which can damage the internal components.
- Follow ESD (Electrostatic Discharge) precautions when handling and soldering the device.
Inquiry - CXD1159Q
