Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VDD) is within the range of 2.0V to 5.5V.
   • Connect the VDD pin to the positive supply and GND pin to the ground.

2. Input Signals:

   • Input signals should be within the range of 0V to VDD.
   • Ensure that input signals do not exceed the supply voltage to avoid damage.

3. Output Configuration:

   • The output pins can source or sink up to 10mA of current.
   • When the output is low, the voltage will be approximately 0.4V.
   • When the output is high, the voltage will be approximately VDD - 0.4V.

4. Temperature Considerations:

   • Operate the device within the temperature range of -40°C to 85°C.
   • Store the device within the temperature range of -65°C to 150°C.

5. Timing Parameters:

   • The rise time (tr) and fall time (tf) are both typically 10ns.
   • Ensure that the load capacitance and any external components do not significantly affect these timings.

6. Quiescent Current:

   • The quiescent current is typically 2.0μA, which helps in minimizing power consumption during idle states.

7. Handling Precautions:

   • Handle the device with care to avoid static discharge, which can damage the internal circuits.
   • Follow proper soldering techniques to ensure reliable connections.

8. Application Notes:

   • Refer to the datasheet for specific application notes and circuit diagrams to ensure optimal performance in your design.