Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (VCC) is within the specified range of 3.0V to 5.5V.
   • The quiescent current (ICC) should not exceed 250 μA.

2. Input Signals:

   • The differential input voltage (VIN) should be kept between -0.3V and 0.3V.
   • The common-mode input voltage (VIN) should be within the range of -7V to 12V.

3. Output Signals:

   • The output voltage swing (VOS) should be 2.4V for high level and 0.1V for low level.

4. Timing Parameters:

   • The rise time (tr) and fall time (tf) should be around 15 ns.
   • The propagation delay (tpd) should be approximately 8 ns.
   • The skew (tskew) should be no more than 1 ns.

5. Protection:

   • The device can handle continuous output short-circuits up to 100 mA.

6. Temperature:

   • For commercial applications, ensure the operating temperature (Toper) is between 0°C and 70°C.
   • For industrial applications, the operating temperature (Toper) can range from -40°C to 85°C.

7. Handling:

   • Handle the device with care to avoid damage from electrostatic discharge (ESD).
   • Follow proper soldering and mounting procedures to ensure reliable operation.

8. Mounting:

   • Use appropriate PCB layout techniques to minimize noise and interference.
   • Ensure adequate heat dissipation if the device is expected to operate at higher temperatures or under heavy loads.