Instructions for Use:

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 2.0V to 6.0V.
   • Connect the ground (GND) pin to a stable 0V reference.

2. Input Signals:

   • Input low voltage (V_IL) should be less than or equal to 0.8V.
   • Input high voltage (V_IH) should be greater than or equal to 2.0V and can go up to V_CC.

3. Output Signals:

   • When the output is low, the voltage (V_OL) should not exceed 0.4V under a load current of 4mA.
   • When the output is high, the voltage (V_OH) should be at least 2.4V under a load current of -0.4mA.

4. Propagation Delay:

   • The typical propagation delay time (t_pd) is 12ns at V_CC = 5V and T_A = 25°C.

5. Power Dissipation:

   • The maximum power dissipation (P_D) should not exceed 100mW at room temperature (T_A = 25°C).

6. Temperature Ranges:

   • The operating temperature range (T_A) is from -40°C to 85°C.
   • The storage temperature range (T_STG) is from -65°C to 150°C.

7. Handling and Storage:

   • Store the device in a dry environment to prevent moisture damage.
   • Handle with care to avoid static discharge, which can damage the device.

8. Soldering:

   • Use appropriate soldering techniques to ensure reliable connections without overheating the device.

9. Testing:

   • Test the device under specified conditions to ensure it meets the performance parameters listed in the table.