Share:
Specifications
SKU: 11224556
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Supply Voltage | Vcc | 2.7 | - | 5.5 | V | Operating voltage range |
| Output Current (Per Pin) | Iout | - | 100 | 150 | mA | Maximum output current per pin |
| Power Dissipation | Pd | - | - | 650 | mW | Maximum power dissipation |
| Operating Temperature | Topr | -40 | - | 85 | °C | Operating temperature range |
| Storage Temperature | Tstg | -55 | - | 150 | °C | Storage temperature range |
| Input Voltage | Vin | 0 | - | Vcc | V | Input voltage range |
| Quiescent Current | Iq | - | 2 | 5 | mA | Quiescent current at Vcc = 5V |
| Output Leakage Current | Ileak | - | 1 | 5 | μA | Leakage current at Vcc = 5V, Ta = 25°C |
| Output Low Voltage | Vol | 0.1 | - | 0.5 | V | Output low voltage at Iout = 100mA |
| Output High Voltage | Voh | 3.5 | - | 5 | V | Output high voltage at Iout = -20mA |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (Vcc) is within the range of 2.7V to 5.5V.
- Use appropriate decoupling capacitors (e.g., 0.1μF ceramic capacitor) close to the Vcc and GND pins to minimize noise and stabilize the power supply.
Output Current:
- The maximum output current per pin is 150mA, but it is recommended to operate at or below 100mA to ensure reliable operation and avoid overheating.
- If higher currents are required, consider using external transistors or drivers.
Power Dissipation:
- The maximum power dissipation is 650mW. Ensure adequate heat sinking if operating near this limit to prevent thermal shutdown or damage.
Operating Temperature:
- The device can operate from -40°C to 85°C. Ensure the ambient temperature does not exceed these limits to maintain performance and reliability.
Storage Temperature:
- Store the device in a temperature range of -55°C to 150°C to avoid damage.
Input Voltage:
- The input voltage should be between 0V and Vcc. Exceeding these limits can cause damage to the device.
Quiescent Current:
- The quiescent current is typically 2mA and can go up to 5mA. This is the current drawn by the device when no load is connected to the output pins.
Output Leakage Current:
- The output leakage current is typically 1μA and can go up to 5μA. This is the current that flows through the output pin when it is supposed to be off.
Output Voltage Levels:
- The output low voltage (Vol) should be between 0.1V and 0.5V when the output is driving a load of 100mA.
- The output high voltage (Voh) should be between 3.5V and 5V when the output is driving a load of -20mA.
Handling Precautions:
- Handle the device with care to avoid static discharge, which can damage the internal circuits.
- Follow proper soldering techniques to avoid thermal shock and mechanical stress during assembly.
Layout Considerations:
- Keep signal traces short and direct to minimize parasitic inductance and capacitance.
- Use ground planes to reduce noise and improve signal integrity.
By following these guidelines, you can ensure optimal performance and reliability of the TD62064P in your application.
(For reference only)Inquiry - TD62064P
