Below is the parameter table and instructions for the SP483CN, a quad 2-line driver/receiver with 3-state outputs.

SP483CN Parameter Table

Instructions for Using SP483CN

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.75 V to 5.25 V.
   • Connect the ground (GND) pin to the system ground.

2. Input Signals:

   • Apply input signals (V_IH or V_IL) to the appropriate input pins.
   • Ensure the input voltages are within the specified ranges to avoid damage or incorrect operation.

3. Output Signals:

   • The output pins will provide the corresponding high (V_OH) or low (V_OL) voltages based on the input signals.
   • The output current (I_OH and I_OL) should be within the specified limits to prevent damage to the device.

4. Propagation Delay:

   • The propagation delay time (t_pd) is the time it takes for the output to respond to a change in the input signal.
   • Ensure that the system timing is designed to accommodate the maximum propagation delay of 15 ns.

5. Skew:

   • The skew (t_skew) is the difference in propagation delay between different channels.
   • Ensure that the system can handle the maximum skew of 5 ns to maintain proper timing.

6. Temperature Considerations:

   • Operate the device within the operating temperature range of -40°C to 85°C.
   • Store the device within the storage temperature range of -65°C to 150°C.

7. Handling and Storage:

   • Handle the device with care to avoid static discharge, which can damage the sensitive components.
   • Store the device in a dry and cool environment to prevent moisture damage.

By following these parameters and instructions, you can ensure reliable and efficient operation of the SP483CN in your application.