Share:
Specifications
SKU: 11224620
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Forward Voltage | VF | - | 1.2 | 1.6 | V | IF = 20 mA, Ta = 25°C |
| Peak Forward Current | IF(P) | - | - | 30 | mA | t = 10 ms, Ta = 25°C |
| Continuous Forward Current | IF | - | - | 20 | mA | Ta = 25°C |
| Reverse Voltage | VR | - | - | 5 | V | IF = 0, Ta = 25°C |
| Output Collector-Emitter Voltage | VCE(OFF) | - | - | 0.7 | V | IF = 0, IO = 0, Ta = 25°C |
| Output Leakage Current | ICEO | - | 0.1 | 1 | μA | VCE = 5V, Ta = 25°C |
| Output Collector-Emitter Saturation Voltage | VCE(SAT) | - | 0.4 | 0.6 | V | IF = 20 mA, IO = 5 mA, Ta = 25°C |
| Output Collector Current | IC | - | - | 5 | mA | IF = 20 mA, Ta = 25°C |
| Isolation Voltage | VIORM | - | - | 500 | Vrms | 1 minute, 50/60 Hz |
| Storage Temperature | TSTG | -40 | - | 110 | °C | - |
| Operating Temperature | TA | -40 | - | 85 | °C | - |
Instructions for Use:
Forward Voltage (VF):
- Ensure that the forward voltage does not exceed 1.6V at a forward current of 20mA to avoid damaging the device.
Peak Forward Current (IF(P)):
- The peak forward current should not exceed 30mA for pulses lasting up to 10ms to prevent overheating.
Continuous Forward Current (IF):
- The continuous forward current should be limited to 20mA to ensure reliable operation.
Reverse Voltage (VR):
- The reverse voltage should not exceed 5V to avoid breakdown.
Output Collector-Emitter Voltage (VCE(OFF)):
- When the device is off, the collector-emitter voltage should not exceed 0.7V.
Output Leakage Current (ICEO):
- The leakage current when the device is off should be less than 1μA to ensure minimal interference.
Output Collector-Emitter Saturation Voltage (VCE(SAT)):
- When the device is on, the saturation voltage should be between 0.4V and 0.6V to ensure efficient operation.
Output Collector Current (IC):
- The output collector current should not exceed 5mA to avoid overloading the device.
Isolation Voltage (VIORM):
- The isolation voltage between the input and output should not exceed 500Vrms for 1 minute at 50/60Hz to maintain safety.
Storage Temperature (TSTG):
- Store the device in a temperature range of -40°C to 110°C to prevent damage.
Operating Temperature (TA):
- Operate the device within a temperature range of -40°C to 85°C to ensure reliable performance.
Handling Precautions:
- ESD Protection: Handle the device with care to avoid electrostatic discharge (ESD) which can damage the internal components.
- Soldering Temperature: Do not exceed the maximum soldering temperature of 260°C for more than 10 seconds to prevent thermal damage.
- Mounting: Ensure proper mounting to avoid mechanical stress on the leads and body of the device.
Inquiry - TLP115A
