Below is the parameter table and instructions for the TD62504P IC:

Parameter Table

Instructions

1. Power Supply:

   • Ensure the supply voltage (V_CC) is within the range of 4.5V to 5.5V.
   • Use a stable power source to avoid fluctuations that could affect the operation of the IC.

2. Output Current:

   • The maximum continuous output current per channel is 100mA. Do not exceed this limit to prevent damage to the IC.
   • If higher currents are required, consider using external transistors or drivers.

3. Operating Temperature:

   • The IC is designed to operate within the temperature range of -40°C to 85°C. Ensure the operating environment does not exceed these limits.
   • For storage, the temperature range is -65°C to 150°C.

4. Input Voltage Levels:

   • The input voltage high level (V_IH) should be between 2.0V and 5.5V.
   • The input voltage low level (V_IL) should be between 0.0V and 0.8V.
   • Ensure that the input signals meet these levels to guarantee proper operation.

5. Quiescent Current:

   • The quiescent current (I_Q) is typically 1.5mA when the supply voltage is 5V and there is no load.
   • This value helps in power budgeting and heat dissipation calculations.

6. Maximum Power Dissipation:

   • The maximum power dissipation (P_D) at ambient temperature (T_A) of 25°C is 625mW.
   • Ensure adequate heat sinking if the IC is expected to dissipate significant power.

7. Output Voltage Levels:

   • The output voltage drop (V_OH) at high level with 100mA load is typically 0.7V.
   • The output voltage rise (V_OL) at low level with 100mA load is typically 0.4V.
   • These values help in designing the load circuitry and ensuring proper logic levels.

8. Handling and Storage:

   • Handle the IC with care to avoid static discharge, which can damage the device.
   • Store the IC in a dry, cool place within the specified storage temperature range.

By following these parameters and instructions, you can ensure reliable and efficient operation of the TD62504P IC in your application.