Instructions for Use:

1. Input Connection:

   • Connect the input voltage (V_IN) to the VIN pin.
   • Ensure the input voltage is within the specified range (7V to 24V).

2. Output Connection:

   • Connect the output load to the VOUT pin.
   • The output voltage is fixed at 5V and can supply up to 100mA.

3. Ground Connection:

   • Connect the ground (GND) pin to the common ground of the circuit.

4. Capacitors:

   • Place a 10μF electrolytic capacitor between VIN and GND close to the regulator.
   • Place a 0.1μF ceramic capacitor between VOUT and GND close to the regulator to improve stability and reduce ripple.

5. Thermal Management:

   • Ensure adequate heat dissipation if operating near the maximum output current, especially in high ambient temperatures.
   • The thermal resistance (θ_JA) should be considered to prevent overheating.

6. Operating Environment:

   • The device is designed to operate within the temperature range of -40°C to 125°C.
   • Store the device in a temperature range of -65°C to 150°C.

7. Regulation and Performance:

   • The line regulation and load regulation are very low, ensuring stable output under varying input conditions and load changes.
   • The ripple rejection is high, providing a clean output voltage even with noisy input.

8. Handling:

   • Handle the device with care to avoid damage from static electricity.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and assembly.