Share:
Specifications
SKU: 11225952
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Input Voltage | V_IN | 4.5 | - | 16 | V | Operating input voltage range |
| Output Voltage | V_OUT | 1.2 | - | 5.0 | V | Adjustable output voltage range |
| Output Current | I_OUT | - | 150 | - | mA | Maximum continuous output current |
| Quiescent Current | I_Q | - | 1.0 | - | mA | Quiescent current at no load |
| Dropout Voltage | V_DROPOUT | - | 0.3 | - | V | Typical dropout voltage at full load |
| Load Regulation | - | - | 0.5 | - | % | Change in output voltage for 0 to 150 mA load |
| Line Regulation | - | - | 0.1 | - | %/V | Change in output voltage per volt change in input |
| Ripple Rejection | - | - | 70 | - | dB | Power supply rejection ratio at 100 Hz |
| Operating Temperature | T_OP | -40 | - | 85 | °C | Operating temperature range |
| Storage Temperature | T_STG | -65 | - | 150 | °C | Storage temperature range |
| Package | - | - | - | - | TO-220 | Package type |
Instructions:
Input Connection:
- Connect the input voltage (V_IN) to the VIN pin.
- Ensure the input voltage is within the specified range (4.5V to 16V).
Output Connection:
- Connect the output voltage (V_OUT) to the VOUT pin.
- Adjust the output voltage using the external resistor network if necessary.
Ground Connection:
- Connect the ground (GND) to the GND pin.
- Ensure a stable and low-impedance ground connection to maintain performance.
Capacitors:
- Use a 10 μF tantalum or ceramic capacitor on the input side for filtering.
- Use a 10 μF tantalum or ceramic capacitor on the output side for stability.
Thermal Considerations:
- Ensure adequate heat sinking, especially when operating at high output currents or in high ambient temperatures.
- The maximum junction temperature should not exceed 125°C.
Output Voltage Adjustment:
- For adjustable versions, use the following formula to set the output voltage: [ V_ = 1.25 left(1 + fracright) ]
- Where ( R_1 ) and ( R_2 ) are the resistors connected to the ADJ pin.
Handling Precautions:
- Handle the device with care to avoid damage from static electricity.
- Follow proper soldering techniques to ensure reliable connections.
Storage:
- Store the device in a dry, cool place away from direct sunlight and extreme temperatures.
Inquiry - 10CTQ150
