Share:
Specifications
SKU: 11226450
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | - | 15 | V |
| Input Voltage (High) | VIH | 2.0 | - | VCC | V |
| Input Voltage (Low) | VIL | 0 | - | 0.8 | V |
| Output Voltage (High) | VOH | 2.4 | - | VCC - 0.6 | V |
| Output Voltage (Low) | VOL | 0 | - | 0.4 | V |
| Input Current (High) | IIH | - | 1.0 | 20 | μA |
| Input Current (Low) | IIL | - | -0.4 | - | μA |
| Output Current (Source) | IOH | - | 4.0 | 15 | mA |
| Output Current (Sink) | IOL | -15 | -4.0 | - | mA |
| Propagation Delay Time | tpd | - | 12 | 40 | ns |
| Power Dissipation | PD | - | - | 100 | mW |
Instructions for Using the CD4050BE
Power Supply:
- Connect the VCC pin to a power supply ranging from 3V to 15V.
- Connect the GND pin to ground.
Input Signals:
- Apply input signals to the input pins (1, 2, 3, 4, 5, 6).
- Ensure that the input voltages do not exceed VCC or go below 0V.
Output Signals:
- The output signals will be available on the output pins (8, 9, 10, 11, 12, 13).
- The output voltage levels will be close to VCC for high logic and close to 0V for low logic.
Current Handling:
- The device can source up to 15mA and sink up to 15mA per output.
- Ensure that the load connected to the output does not exceed these current limits.
Propagation Delay:
- The propagation delay time is typically 12ns at VCC = 15V and can vary between 12ns and 40ns depending on the supply voltage and operating conditions.
Operating Temperature:
- The device is designed to operate within the temperature range of -40°C to +85°C.
Handling Precautions:
- Handle the device with care to avoid static damage.
- Use appropriate ESD protection when handling the device.
Mounting:
- Ensure proper mounting to prevent mechanical stress on the pins.
- Follow standard PCB design guidelines for optimal performance and reliability.
By following these instructions, you can ensure reliable operation of the CD4050BE buffer/line driver.
(For reference only)Inquiry - CD4050BE
