Share:
Specifications
SKU: 11226643
| Parameter | Symbol | Min | Typical | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.75 | - | 5.25 | V | Recommended operating range is 4.75V to 5.25V |
| Input Low Voltage | VIL | 0.8 | - | - | V | Input voltage for logic low |
| Input High Voltage | VIH | - | - | 2.0 | V | Input voltage for logic high |
| Output Low Voltage | VOL | 0.25 | - | 0.55 | V | Output voltage for logic low (IOL = 16 mA) |
| Output High Voltage | VOH | 2.7 | - | 3.5 | V | Output voltage for logic high (IOH = -0.4 mA) |
| Propagation Delay Time | tpd | - | 19 | 29 | ns | Propagation delay time (typical at VCC = 5V, TA = 25°C) |
| Power Dissipation | PD | - | - | 100 | mW | Maximum power dissipation per package |
| Operating Temperature | TA | -40 | - | 85 | °C | Ambient temperature range |
| Storage Temperature | TSTG | -65 | - | 150 | °C | Storage temperature range |
| Input Current | IIH | - | 20 | 40 | μA | Input current at high level (VIH = 2.0V) |
| Input Current | IIL | -10 | - | -1 | mA | Input current at low level (VIL = 0.8V) |
| Output Current (Low) | IOL | - | -16 | -50 | mA | Output current when low (VOL = 0.4V) |
| Output Current (High) | IOH | - | -0.4 | -4 | mA | Output current when high (VOH = 2.4V) |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the recommended range of 4.75V to 5.25V.
- Connect the ground (GND) pin to a stable ground reference.
Input Signals:
- Apply input signals that meet the specified input voltage levels (VIL and VIH).
- Ensure input currents do not exceed the maximum ratings (IIH and IIL).
Output Loads:
- Connect output loads that comply with the maximum output current ratings (IOL and IOH).
- Verify that the output voltages (VOL and VOH) are within the specified limits under load conditions.
Temperature Considerations:
- Operate the device within the ambient temperature range of -40°C to 85°C.
- Store the device within the storage temperature range of -65°C to 150°C.
Propagation Delay:
- Account for the propagation delay (tpd) in your timing calculations to ensure proper operation.
Power Dissipation:
- Ensure the total power dissipation does not exceed 100 mW to avoid overheating and potential damage to the device.
Handling Precautions:
- Handle the device with care to avoid static discharge, which can damage the internal circuits.
- Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.
By adhering to these parameters and instructions, you can ensure reliable and efficient operation of the SN74ALS74AN dual D-type flip-flop.
(For reference only)Inquiry - SN74ALS74AN
