Share:
Specifications
SKU: 11226669
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.0 | - | 6.0 | V | - |
| Input Voltage (High) | VIH | 3.15 | - | VCC | V | - |
| Input Voltage (Low) | VIL | 0 | - | 1.35 | V | - |
| Output Voltage (High) | VOH | 2.4 | - | VCC - 0.1 | V | - |
| Output Voltage (Low) | VOL | 0 | - | 0.1 | V | - |
| Input Current (High) | IIH | - | 1 | 20 | μA | - |
| Input Current (Low) | IIL | -20 | -1 | - | μA | - |
| Output Current (Source) | IOH | - | 4 | 25 | mA | - |
| Output Current (Sink) | IOL | -25 | -4 | - | mA | - |
| Propagation Delay Time | tpd | 5 | 10 | 25 | ns | - |
| Power Dissipation | PD | - | - | 100 | mW | - |
| Operating Temperature | TA | -40 | - | 85 | °C | - |
Instructions for Using 74HC4050AP
Supply Voltage:
- Ensure the supply voltage (VCC) is within the range of 2.0V to 6.0V. The device will not function properly outside this range.
Input Voltage Levels:
- For a high input (VIH), the voltage should be at least 3.15V or up to VCC.
- For a low input (VIL), the voltage should be between 0V and 1.35V.
Output Voltage Levels:
- The output voltage when high (VOH) will be at least 2.4V and can go up to VCC - 0.1V.
- The output voltage when low (VOL) will be no more than 0.1V.
Current Ratings:
- The input current (IIH and IIL) should be within the specified limits to avoid damage.
- The output current (IOH and IOL) should also be within the specified limits to ensure proper operation and prevent damage.
Propagation Delay:
- The propagation delay time (tpd) is the time it takes for a change in input to affect the output. It ranges from 5ns to 25ns, depending on the operating conditions.
Power Dissipation:
- The maximum power dissipation (PD) is 100mW. Ensure that the device does not exceed this limit to avoid overheating.
Operating Temperature:
- The device can operate in temperatures ranging from -40°C to 85°C. Ensure that the operating environment stays within these limits.
Handling:
- Handle the device with care to avoid static discharge, which can damage the internal components. Use appropriate ESD protection measures.
Layout and Mounting:
- Follow recommended PCB layout guidelines to ensure optimal performance and reliability. Proper grounding and decoupling capacitors should be used.
Testing:
- Before finalizing the design, test the circuit under various conditions to ensure it meets the required specifications and operates reliably.
Inquiry - 74HC4050AP
