Share:
Specifications
SKU: 11228123
| Parameter | Symbol | Min | Typical | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Drain-Source Voltage | VDS | - | - | 80 | V | |
| Gate-Source Voltage | VGS | -15 | - | 15 | V | |
| Continuous Drain Current | ID | - | 22 | - | A | TC = 25°C |
| Pulse Drain Current | IDpeak | - | 44 | - | A | tp = 10 ms, TC = 25°C |
| Gate Charge | QG | - | 63 | - | nC | VGS = 10V |
| Input Capacitance | Ciss | - | 2200 | - | pF | VDS = 0V |
| Output Capacitance | Coss | - | 190 | - | pF | VDS = 25V |
| Reverse Transfer Capacitance | Crss | - | 120 | - | pF | VDS = 25V |
| Threshold Gate Voltage | VGS(th) | 2 | 4 | 6 | V | ID = 250 μA |
| On-State Resistance | RDS(on) | - | 0.08 | - | Ω | VGS = 10V, ID = 22A |
| Total Power Dissipation | PTOT | - | - | 140 | W | TC = 25°C |
| Junction Temperature | TJ | - | - | 175 | °C | |
| Storage Temperature | TSTG | -55 | - | 150 | °C |
Instructions for Use:
Handling Precautions:
- The FQP5N80 is sensitive to electrostatic discharge (ESD). Use proper ESD protection when handling.
- Avoid exceeding the maximum ratings specified in the table to prevent damage.
Mounting:
- Ensure good thermal management by using appropriate heatsinks or cooling methods, especially when operating at high currents or power levels.
- Follow recommended PCB layout guidelines to minimize parasitic inductances and ensure reliable operation.
Gate Drive:
- Apply a gate voltage (VGS) within the specified range to turn the MOSFET on or off.
- Use a gate resistor to control the switching speed and reduce ringing.
Thermal Considerations:
- Monitor the junction temperature (TJ) to ensure it does not exceed the maximum rating.
- Use thermal vias and adequate copper area on the PCB to improve heat dissipation.
Testing:
- Perform initial testing under controlled conditions to verify proper operation.
- Regularly check for signs of overheating or abnormal behavior during operation.
Storage:
- Store the device in a dry, cool place away from direct sunlight and sources of heat.
- Keep the device in its original packaging until ready for use to protect against moisture and static.
Environmental Compliance:
- Ensure that the device complies with relevant environmental regulations and standards.
- Dispose of the device according to local environmental guidelines.
Inquiry - FQP5N80
