Share:
Specifications
SKU: 11228136
| Parameter | Symbol | Min | Typ | Max | Unit | Notes |
|---|---|---|---|---|---|---|
| Forward Voltage Drop | VF | - | 1.7 | 2.2 | V | @ IF = 8 A, TJ = 25°C |
| Reverse Recovery Time | trr | - | 35 | 45 | ns | @ IF = 8 A, di/dt = 200 A/μs |
| Peak Reverse Current | IRM | - | - | 80 | A | @ VR = 600 V, TJ = 25°C |
| Continuous Reverse Voltage | VR | - | - | 600 | V | @ IF = 0 A, TJ = 150°C |
| Average Rectified Output Current | IF(AV) | - | 8 | - | A | @ TA = 45°C, f = 50 Hz, single-phase full-wave circuit |
| Junction to Case Thermal Resistance | RθJC | - | 1.5 | - | °C/W | - |
| Junction to Ambient Thermal Resistance | RθJA | - | 40 | - | °C/W | - |
| Operating Junction Temperature Range | TJ | -40 | - | 150 | °C | - |
| Storage Temperature Range | TSTG | -40 | - | 150 | °C | - |
Instructions for Use:
Mounting and Handling:
- Handle the FFP08S60STU with care to avoid mechanical damage.
- Ensure that the mounting surface is clean and flat to ensure good thermal contact.
- Apply a suitable thermal interface material (TIM) between the device and the heat sink to enhance thermal performance.
Electrical Connections:
- Ensure that all electrical connections are secure and free from oxidation or contamination.
- Use appropriate wire gauges to handle the current ratings of the device.
Thermal Management:
- The device must be adequately cooled to prevent overheating. Use a heat sink with sufficient thermal capacity and ensure proper airflow.
- Monitor the junction temperature (TJ) to ensure it remains within the specified range.
Surge Current Handling:
- The device can handle short-term surge currents, but prolonged exposure to high currents can reduce its lifespan. Ensure that the circuit design includes adequate protection against overcurrent conditions.
Reverse Voltage Protection:
- The device is rated for a maximum reverse voltage of 600 V. Ensure that the circuit does not exceed this voltage to avoid breakdown.
Storage:
- Store the device in a dry, cool environment within the specified storage temperature range to prevent degradation.
Testing:
- Before installation, test the device to ensure it meets the specified electrical parameters.
- Use appropriate test equipment and follow safety guidelines to avoid damage to the device or injury.
Compliance:
- Ensure that the device complies with all relevant safety and regulatory standards for your application.
Inquiry - FFP08S60STU
