Share:
Specifications
SKU: 11228274
| Parameter | Description | Value |
|---|---|---|
| Part Number | Component Identifier | SB20200FCT |
| Type | Component Type | Schottky Diode |
| Maximum Reverse Voltage (V_RR) | Maximum voltage that can be applied in reverse direction without breakdown | 20V |
| Maximum Forward Current (I_F) | Maximum continuous forward current | 200A |
| Peak Forward Surge Current (I_FM) | Maximum peak forward surge current (10ms single pulse) | 600A |
| Forward Voltage Drop (V_F) | Voltage drop across the diode when conducting forward current (at 25°C, I_F = 200A) | 0.55V |
| Reverse Recovery Time (t_rr) | Time taken for the diode to recover from forward to reverse conduction (at I_F = 200A, I_R = 20A) | 35ns |
| Junction Operating Temperature (T_J) | Range of operating temperatures for the junction | -55°C to +175°C |
| Storage Temperature (T_STG) | Range of temperatures for storage | -55°C to +175°C |
| Package | Physical package type | TO-247-2L |
| Mounting Type | Method of mounting | Through-hole |
Instructions for Use:
Handling Precautions:
- Handle the diode with care to avoid mechanical damage.
- Use appropriate ESD protection to prevent damage from static electricity.
Soldering:
- Soldering temperature should not exceed 260°C.
- Soldering time should not exceed 10 seconds.
- Allow the diode to cool naturally after soldering to avoid thermal shock.
Thermal Management:
- Ensure adequate heat sinking to manage the power dissipation, especially at high forward currents.
- The maximum power dissipation (P_D) can be calculated using the formula: P_D = V_F * I_F.
Circuit Design:
- Ensure the circuit design accounts for the maximum reverse voltage and forward current ratings.
- Use the diode in applications where fast switching and low forward voltage drop are required, such as in power supplies and motor control circuits.
Storage:
- Store the diode in a dry, cool place within the specified storage temperature range.
- Avoid exposure to corrosive environments.
Testing:
- Test the diode using a multimeter or diode tester to ensure it is functioning correctly before installation.
- Check for continuity in the forward direction and open circuit in the reverse direction.
Compliance:
- Ensure the diode meets any relevant safety and regulatory standards for your application.
Inquiry - SB20200FCT
