Share:
Specifications
SKU: 11228728
| Parameter | Symbol | Min | Typical | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Drain-Source Voltage | VDS | - | - | 100 | V | - |
| Gate-Source Voltage | VGS | -15 | - | 15 | V | - |
| Drain Current | ID | - | 4 | 8 | A | VDS = 25V, VGS = 10V |
| Transconductance | gfs | - | 2.5 | - | S | VDS = 25V, VGS = 10V, ID = 4A |
| Input Capacitance | Ciss | - | 180 | - | pF | f = 1MHz |
| Output Capacitance | Coss | - | 40 | - | pF | f = 1MHz |
| Reverse Transfer Capacitance | Crss | - | 30 | - | pF | f = 1MHz |
| Gate Charge | QG | - | 10 | - | nC | VGS = 10V |
| Total Power Dissipation | PTOT | - | - | 200 | W | TC = 25°C |
| Junction Temperature | TJ | - | - | 150 | °C | - |
Instructions for Use:
Mounting:
- Ensure proper heat sinking to maintain the junction temperature within safe limits.
- Use a flat surface with good thermal conductivity for mounting.
Biasing:
- Apply the gate-source voltage (VGS) carefully to avoid exceeding the maximum ratings.
- Ensure the drain-source voltage (VDS) does not exceed 100V to prevent breakdown.
Operation:
- Operate within the specified drain current (ID) limits to avoid overheating and potential damage.
- Monitor the power dissipation (PTOT) to ensure it does not exceed 200W at 25°C ambient temperature.
Storage:
- Store in a dry, cool place away from direct sunlight and extreme temperatures.
- Handle with care to avoid mechanical stress or damage to the leads.
Testing:
- Use appropriate test equipment and methods to measure parameters such as transconductance, capacitances, and gate charge.
- Ensure all connections are secure and free from shorts or open circuits.
Safety:
- Follow all safety guidelines and precautions when handling high voltages and currents.
- Use protective equipment such as gloves and goggles when necessary.
Inquiry - 2SK3667
