Instructions for Using L7805CD2T-TR

1. Input Connection:

   • Connect the input voltage to the "IN" pin.
   • Ensure the input voltage is within the range of 7V to 35V.

2. Output Connection:

   • Connect the output voltage to the "OUT" pin.
   • The output voltage will be regulated to 5V.

3. Ground Connection:

   • Connect the ground (GND) to the "COM" pin.

4. Capacitors:

   • Place a 0.33μF capacitor between the input and ground to filter out noise.
   • Place a 0.1μF capacitor between the output and ground to stabilize the output voltage.

5. Thermal Considerations:

   • Ensure adequate heat dissipation, especially when operating at high output currents.
   • Use a heatsink if necessary to keep the junction temperature below 125°C.

6. Protection:

   • The device includes thermal shutdown and short-circuit protection.
   • However, it is recommended to use external fuses or current-limiting resistors for additional protection.

7. Storage and Handling:

   • Store the device in a dry environment with temperatures between -65°C and 150°C.
   • Handle with care to avoid damage to the pins and the device itself.

8. Mounting:

   • Solder the device onto the PCB using standard soldering techniques.
   • Ensure that the solder joints are clean and free of excess solder to prevent shorts.