Share:
Specifications
SKU: 11232500
| Parameter | Description | Value |
|---|---|---|
| Part Number | Part number of the device | S60SC4MT |
| Type | Type of component | EEPROM |
| Memory Size | Total memory capacity | 512 Kbit (64 KByte) |
| Organization | Memory organization | 8K x 8 |
| Voltage - Supply | Operating voltage range | 1.7V to 3.6V |
| Current - Active | Active current | 1.0 mA (Typ) |
| Current - Standby | Standby current | 1.0 μA (Max) |
| Speed | Access time | 55 ns (Max) |
| Interface | Communication interface | SPI |
| Package | Package type | SOIC-8 |
| Operating Temp. | Operating temperature range | -40°C to 85°C |
| Write Cycle | Number of write cycles | 1,000,000 |
| Data Retention | Data retention time | 100 years |
| Pin Configuration | Pin configuration details | See below |
Pin Configuration
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | CS | Chip Select (active low) |
| 2 | SI | Serial Input |
| 3 | VSS | Ground |
| 4 | SCK | Serial Clock |
| 5 | SO | Serial Output |
| 6 | HOLD | Hold (active low) |
| 7 | WP | Write Protect (active low) |
| 8 | VCC | Supply Voltage |
Instructions for Use
Power Supply:
- Connect VCC to the supply voltage within the range of 1.7V to 3.6V.
- Connect VSS to ground.
Communication:
- Use the SPI interface to communicate with the device.
- Ensure that the SCK (Serial Clock) signal is within the specified frequency range.
- The SI (Serial Input) pin receives data from the master device.
- The SO (Serial Output) pin transmits data to the master device.
- The CS (Chip Select) pin must be pulled low to select the device for communication.
Write Protection:
- The WP (Write Protect) pin can be used to prevent accidental writes to the memory. Pull it high to enable write protection.
Hold Function:
- The HOLD pin can be used to pause ongoing operations. Pull it low to activate the hold function.
Programming:
- Refer to the device datasheet for specific command sequences and timing diagrams for read, write, and erase operations.
Temperature Considerations:
- Ensure that the operating temperature remains within the range of -40°C to 85°C to maintain reliable operation.
Handling:
- Handle the device with care to avoid static discharge, which can damage the component.
- Follow proper ESD (Electrostatic Discharge) precautions during handling and installation.
Inquiry - S60SC4MT
