Share:
Specifications
SKU: 11232860
| Parameter | Symbol | Min | Typical | Max | Unit | Condition |
|---|---|---|---|---|---|---|
| Continuous Drain Current | ID | - | 60 | - | A | TC = 25°C |
| Pulse Drain Current | IGM | - | 300 | - | A | t = 10 μs, Rth(j-c) = 0.4 K/W |
| Drain-Source On-State Resistance | RDS(on) | - | 125 | - | mΩ | VGS = 10 V, ID = 60 A, TC = 25°C |
| Gate Charge | QG | - | 180 | - | nC | VDS = 600 V, VGS = 15 V, ID = 60 A |
| Input Capacitance | Ciss | - | 7750 | - | pF | VDS = 600 V, VGS = 0 V |
| Output Capacitance | Coss | - | 1300 | - | pF | VDS = 600 V, VGS = 0 V |
| Reverse Transfer Capacitance | Crss | - | 1300 | - | pF | VDS = 600 V, VGS = 0 V |
| Maximum Drain-Source Voltage | VDS(max) | - | 600 | - | V | - |
| Maximum Gate-Source Voltage | VGS(max) | -15 | - | 15 | V | - |
| Junction Temperature | Tj | -55 | - | 175 | °C | - |
| Storage Temperature | Tstg | -55 | - | 175 | °C | - |
Instructions for Use:
Mounting and Handling:
- Ensure proper heat sinking to maintain the junction temperature within the specified range.
- Handle the device with care to avoid mechanical stress or damage.
Electrical Connections:
- Connect the drain (D), source (S), and gate (G) terminals correctly to the circuit.
- Use short and thick wires to minimize inductance and resistance in the connections.
Thermal Management:
- Use a suitable heat sink to dissipate the heat generated by the device during operation.
- Ensure adequate airflow around the heat sink for efficient cooling.
Gate Drive:
- Apply a gate voltage (VGS) of at least 10 V to fully turn on the MOSFET.
- Use a gate resistor to control the switching speed and reduce electromagnetic interference (EMI).
Overcurrent Protection:
- Implement overcurrent protection to prevent damage due to excessive current.
- Monitor the drain current (ID) and limit it to the maximum rated value.
Storage and Transportation:
- Store the device in a dry and cool environment.
- Avoid exposure to high humidity and extreme temperatures.
Testing and Troubleshooting:
- Use a multimeter or oscilloscope to verify the correct operation of the MOSFET.
- Check for any signs of overheating or unusual behavior during operation.
By following these instructions, you can ensure the reliable and efficient operation of the IPP60R125C6 MOSFET.
(For reference only)Inquiry - IPP60R125C6
