Share:
Specifications
SKU: 11232903
| Parameter | Symbol | Min | Typical | Max | Unit | Condition |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 10 | - | 20 | V | - |
| Logic Input High Level | VIH | 2.0 | - | 5.5 | V | - |
| Logic Input Low Level | VIL | 0.8 | - | 1.5 | V | - |
| High-Side Driver Output | VOH | 14 | - | 16 | V | VCC = 15V, IH = 20mA |
| High-Side Driver Output | VOL | 0.5 | - | 1.5 | V | VCC = 15V, IL = 100mA |
| Low-Side Driver Output | VOH | 14 | - | 16 | V | VCC = 15V, IH = 20mA |
| Low-Side Driver Output | VOL | 0.5 | - | 1.5 | V | VCC = 15V, IL = 100mA |
| Propagation Delay Time | td | 50 | - | 100 | ns | VCC = 15V, VIN = 5V, IOUT = 20mA |
| Maximum Operating Frequency | fMAX | - | 500 | - | kHz | VCC = 15V, VIN = 5V, RG = 10Ω |
| Thermal Shutdown Threshold | TSD | 150 | - | 170 | °C | - |
| Storage Temperature Range | TSTG | -40 | - | 150 | °C | - |
Instructions for Use:
Power Supply:
- Ensure that the supply voltage (VCC) is within the specified range of 10V to 20V.
- Connect the VCC pin to a stable power source.
Logic Inputs:
- Apply logic high levels (VIH) between 2.0V and 5.5V.
- Apply logic low levels (VIL) between 0.8V and 1.5V.
Driver Outputs:
- The high-side driver output (VOH) should be between 14V and 16V when VCC is 15V and the current is 20mA.
- The high-side driver output (VOL) should be between 0.5V and 1.5V when VCC is 15V and the current is 100mA.
- The low-side driver output (VOH) should be between 14V and 16V when VCC is 15V and the current is 20mA.
- The low-side driver output (VOL) should be between 0.5V and 1.5V when VCC is 15V and the current is 100mA.
Propagation Delay:
- The propagation delay time (td) should be between 50ns and 100ns under typical operating conditions.
Maximum Operating Frequency:
- The maximum operating frequency (fMAX) is 500kHz with a gate resistance (RG) of 10Ω.
Thermal Management:
- Monitor the thermal shutdown threshold (TSD) to ensure it does not exceed 170°C.
- Ensure proper heat dissipation to prevent overheating.
Storage:
- Store the device in an environment with a temperature range of -40°C to 150°C.
Handling:
- Handle the device with care to avoid damage from static electricity or physical stress.
- Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.
Inquiry - IR2133J
