Instructions for Use

1. Installation:

   • Ensure that the input voltage is within the specified range (4.5V to 5.5V DC).
   • Connect the input power supply to the designated input terminals.
   • Connect the load to the output terminals.

2. Mounting:

   • For surface mount, solder the component directly to the PCB following the recommended footprint.
   • For through-hole mounting, insert the component into the PCB and solder the leads securely.

3. Operation:

   • Power on the device and verify that the output voltage is stable at 5V DC.
   • Monitor the operating temperature to ensure it stays within the specified range (-40°C to +85°C).

4. Protection:

   • The SRV05-4 includes overvoltage, overcurrent, and short-circuit protection. In the event of a fault, the device will automatically shut down to prevent damage.

5. Storage:

   • Store the device in a dry, cool environment with temperatures between -55°C and +125°C.

6. Maintenance:

   • Regularly inspect the connections and solder joints for any signs of wear or damage.
   • If the device is not in use for an extended period, store it in a protective case or bag to prevent dust and moisture accumulation.

7. Troubleshooting:

   • If the output voltage is not stable, check the input voltage and ensure it is within the specified range.
   • If the device overheats, reduce the load or improve cooling conditions.
   • If the device fails to start, check for any short circuits or open circuits in the connections.