Instructions for Using the TC4050BF:

1. Supply Voltage:

   • The device operates with a supply voltage range from 2.0V to 6.0V. Ensure the power supply is within this range to avoid damage.

2. Input Levels:

   • For the input to be recognized as low (V_IL), it should be less than or equal to 1.5V.
   • For the input to be recognized as high (V_IH), it should be greater than or equal to 3.5V and can go up to the supply voltage V_CC.

3. Output Levels:

   • When the output is low (V_OL), it will be between 0.1V and 0.4V.
   • When the output is high (V_OH), it will be between V_CC - 0.4V and V_CC - 0.1V.

4. Leakage Currents:

   • The input leakage current (I_IL) and output leakage current (I_OL) should be kept within ±1μA to ensure reliable operation.

5. Propagation Delay:

   • The propagation delay time (t_pd) is typically 9ns at a supply voltage of 5V, with a load capacitance of 15pF.

6. Power Dissipation:

   • The maximum power dissipation (P_D) is 100mW. Ensure proper heat dissipation if the device is operating near this limit.

7. Handling and Storage:

   • Handle the device with care to avoid static damage. Store in a dry, cool place away from direct sunlight.

8. Layout Considerations:

   • Use short and wide traces for power and ground connections to minimize inductance and resistance.
   • Place decoupling capacitors close to the power pins to filter out noise.

By following these parameters and instructions, you can ensure optimal performance and reliability of the TC4050BF in your circuits.