Share:
Specifications
SKU: 11242329
| Parameter | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.0 | - | 6.0 | V |
| Input Low Voltage | VIL | - | 0.8 | 1.5 | V |
| Input High Voltage | VIH | 3.5 | - | VCC | V |
| Output Low Voltage | VOL | - | 0.1 | 0.4 | V |
| Output High Voltage | VOH | 2.4 | - | VCC - 0.1 | V |
| Input Leakage Current | IIL | - | - | ±1.0 | μA |
| Output Sink Current | IOL | - | - | 25 | mA |
| Output Source Current | IOH | - | - | -5 | mA |
| Propagation Delay Time | tpd | - | 9 | 22 | ns |
| Power Dissipation | PTOT | - | - | 100 | mW |
| Operating Temperature | TA | -40 | - | 85 | °C |
Instructions for 74HC30:
Supply Voltage (VCC):
- Ensure the supply voltage is within the range of 2.0V to 6.0V to avoid damage to the device.
Input Voltage Levels:
- For a logic low input, the voltage should be between 0.0V and 1.5V.
- For a logic high input, the voltage should be between 3.5V and VCC.
Output Voltage Levels:
- The output low voltage (VOL) should not exceed 0.4V.
- The output high voltage (VOH) should be at least 2.4V and can go up to VCC - 0.1V.
Current Ratings:
- The maximum sink current (IOL) is 25mA.
- The maximum source current (IOH) is -5mA.
Propagation Delay:
- The typical propagation delay time (tpd) is 9ns, with a maximum of 22ns.
Power Dissipation:
- The total power dissipation (PTOT) should not exceed 100mW to prevent overheating.
Operating Temperature:
- The device is designed to operate within the temperature range of -40°C to 85°C.
Handling and Storage:
- Handle the device with care to avoid static damage. Use proper ESD protection.
- Store the device in a dry environment to prevent moisture damage.
Schematic and Layout:
- Ensure proper decoupling capacitors are placed close to the power pins to reduce noise and improve stability.
- Follow recommended PCB layout guidelines to minimize signal interference and ensure reliable operation.
Inquiry - 74HC30
