Share:
Specifications
SKU: 11243306
| Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | |
| Supply Current | ICC | VCC = 5V, VO = 0V | - | 6.5 | - | mA |
| Input Voltage Range | VI | VCC = 5V | 0 | - | 5 | V |
| Output Voltage Range | VO | VCC = 5V | 0 | - | 5 | V |
| Input Offset Voltage | VOS | VCC = 5V, TA = 25°C | -0.3 | 0 | 0.3 | mV |
| Input Bias Current | IB | VCC = 5V, TA = 25°C | - | 50 | - | nA |
| Input Impedance | RIN | VCC = 5V, TA = 25°C | 10 | - | - | MΩ |
| Slew Rate | SR | VCC = 5V, TA = 25°C | 1.0 | - | - | V/μs |
| Bandwidth | BW | VCC = 5V, TA = 25°C | - | 1.2 | - | MHz |
| Common Mode Rejection Ratio | CMRR | VCC = 5V, TA = 25°C | 80 | - | - | dB |
| Power Supply Rejection Ratio | PSRR | VCC = 5V, TA = 25°C | 80 | - | - | dB |
Instructions for Use:
Supply Voltage:
- Ensure the supply voltage is within the range of 4.5V to 5.5V. The typical operating voltage is 5V.
Supply Current:
- The typical supply current is 6.5mA when the supply voltage is 5V and the output voltage is 0V.
Input Voltage Range:
- The input voltage should be between 0V and 5V when the supply voltage is 5V.
Output Voltage Range:
- The output voltage can swing from 0V to 5V when the supply voltage is 5V.
Input Offset Voltage:
- The input offset voltage should be within ±0.3mV at room temperature (25°C).
Input Bias Current:
- The input bias current is typically 50nA at room temperature (25°C).
Input Impedance:
- The input impedance is at least 10MΩ at room temperature (25°C).
Slew Rate:
- The slew rate is 1.0V/μs at room temperature (25°C).
Bandwidth:
- The typical bandwidth is 1.2MHz at room temperature (25°C).
Common Mode Rejection Ratio (CMRR):
- The CMRR is at least 80dB at room temperature (25°C).
Power Supply Rejection Ratio (PSRR):
- The PSRR is at least 80dB at room temperature (25°C).
Additional Notes:
- Always ensure that the device is operated within its specified temperature range to maintain performance.
- Proper decoupling capacitors should be used to stabilize the power supply and reduce noise.
- For optimal performance, refer to the detailed datasheet and application notes provided by Analog Devices.
Inquiry - AD712JR
