Share:
Specifications
SKU: 11244047
| Parameter | Description | Value |
|---|---|---|
| Device Type | Type of Device | CPLD (Complex Programmable Logic Device) |
| Part Number | Specific Part Identifier | EPM570T100C5N |
| Family | Family of Devices | MAX V |
| Density | Logic Elements (LEs) | 570 |
| I/O Pins | Number of Input/Output Pins | 100 |
| Package | Package Type | TQFP-144 |
| Speed Grade | Speed Performance | -5 (ns) |
| Operating Voltage | Supply Voltage Range | 1.8V to 3.6V |
| Configuration Memory | Configuration Memory Type | Non-Volatile (Flash) |
| Configuration Time | Time to Configure from Flash | < 10 ms |
| JTAG Boundary-Scan | JTAG Support | Yes |
| Temperature Range | Operating Temperature | -40°C to +85°C |
| Power Consumption | Typical Power Consumption | 20 mW (static), 100 mW (dynamic) |
| Clock Resources | Number of Dedicated Clock Inputs | 4 |
| Embedded Functions | Built-in Functions | PLL, DSP Blocks, RAM Blocks |
| Programming Interface | Programming Methods | JTAG, AS (Active Serial), PS (Passive Serial) |
| Security Features | Security Options | User Code Protection, Readback Protection |
Instructions for Use:
Power Supply:
- Ensure the supply voltage is within the specified range (1.8V to 3.6V).
- Connect the VCC and GND pins appropriately.
Configuration:
- Use the JTAG interface for programming and configuration.
- For non-volatile configuration, ensure the device is programmed with the desired bitstream using a supported programming tool.
Clocking:
- Connect external clocks to the dedicated clock inputs.
- Utilize the internal PLL for clock management if required.
I/O Usage:
- Configure I/O pins as inputs or outputs based on your design requirements.
- Ensure proper pull-up or pull-down resistors are used for input pins if necessary.
Thermal Management:
- Place the device in an area with adequate airflow to manage heat dissipation.
- Consider using a heatsink if operating at high power levels.
Testing and Debugging:
- Use boundary-scan (JTAG) for testing and debugging the device.
- Verify the configuration and functionality using simulation tools before physical implementation.
Security:
- Enable user code protection and readback protection to secure your design.
- Follow best practices for securing the programming interface and configuration data.
Storage and Handling:
- Store the device in a static-protected environment.
- Handle the device with care to avoid damage to the pins and package.
Inquiry - EPM570T100C5N
