Specifications
SKU: 11244473
original binding quality products
Parameter | Symbol | Conditions | Min | Typ | Max | Unit |
---|---|---|---|---|---|---|
Supply Voltage | VCC | Continuous operation | 2.0 | 5.5 | V | |
Output High Voltage | VOH | IOL = -4 mA, VCC = 5 V | 2.7 | 5.0 | V | |
Output Low Voltage | VOL | IOL = 16 mA, VCC = 5 V | 0.0 | 0.4 | V | |
Input High Voltage | VIH | VCC = 5 V | 2.0 | 5.5 | V | |
Input Low Voltage | VIL | VCC = 5 V | 0.0 | 0.8 | V | |
Propagation Delay Time | tpd | VCC = 5 V, TA = 25°C | 3.0 | 7.0 | ns | |
Power Dissipation | PD | Continuous operation | 360 | mW | ||
Operating Temperature | TA | Continuous operation | -40 | 85 | °C | |
Storage Temperature | TSTG | Storage | -65 | 150 | °C |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range of 2.0 V to 5.5 V.
- Connect the ground (GND) pin to a stable reference point.
Input Signals:
- Apply input signals that meet the input high (VIH) and input low (VIL) voltage levels.
- Avoid floating inputs; use pull-up or pull-down resistors if necessary.
Output Signals:
- The output high (VOH) and output low (VOL) voltages should be within the specified limits.
- Ensure the load connected to the output does not exceed the maximum current ratings.
Propagation Delay:
- The propagation delay time (tpd) is crucial for timing considerations in your circuit design.
Temperature Considerations:
- Operate the device within the specified operating temperature range (-40°C to 85°C).
- Store the device within the storage temperature range (-65°C to 150°C).
Power Dissipation:
- Ensure the total power dissipation (PD) does not exceed 360 mW to avoid overheating.
Handling:
- Handle the device with care to prevent damage from electrostatic discharge (ESD).
- Follow proper soldering techniques to ensure reliable connections.
Layout:
- Use a good PCB layout practice, including short traces and proper decoupling capacitors near the power pins to minimize noise and improve performance.
Inquiry - SN74AC04PWR