Share:
Specifications
SKU: 11246450
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions |
|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.0 | - | 6.0 | V | - |
| Input Low Voltage | VIL | - | - | 1.5 | V | VCC = 4.5V to 5.5V |
| Input High Voltage | VIH | 3.5 | - | - | V | VCC = 4.5V to 5.5V |
| Output Low Voltage | VOL | - | 0.1 | 0.2 | V | IOL = 4mA, VCC = 4.5V to 5.5V |
| Output High Voltage | VOH | 4.8 | - | - | V | IOH = -0.4mA, VCC = 4.5V to 5.5V |
| Input Leakage Current | IIL | -1 | - | 1 | μA | VCC = 4.5V to 5.5V |
| Output Leakage Current | IOL | -1 | - | 1 | μA | VCC = 4.5V to 5.5V |
| Propagation Delay Time | tpd | - | 9 | - | ns | VCC = 5V, TA = 25°C |
| Power Dissipation | Ptot | - | - | 100 | mW | Per Package |
| Operating Temperature | TA | -40 | - | 85 | °C | - |
| Storage Temperature | TSTG | -65 | - | 150 | °C | - |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the specified range (2.0V to 6.0V).
- Connect the ground (GND) pin to a stable 0V reference.
Input Signals:
- Input signals should be within the valid input voltage range.
- For VCC = 4.5V to 5.5V, VIL should be ≤ 1.5V and VIH should be ≥ 3.5V.
Output Signals:
- When driving loads, ensure the output current does not exceed the maximum ratings.
- For VCC = 4.5V to 5.5V, VOL should be ≤ 0.2V at 4mA and VOH should be ≥ 4.8V at -0.4mA.
Propagation Delay:
- The propagation delay time (tpd) is typically 9ns at VCC = 5V and TA = 25°C.
Temperature Considerations:
- Operate the device within the specified temperature range (-40°C to 85°C).
- Store the device in a temperature range of -65°C to 150°C.
Handling:
- Handle the device with care to avoid damage from electrostatic discharge (ESD).
- Follow proper soldering techniques to ensure reliable connections.
Decoupling Capacitors:
- Place decoupling capacitors close to the power supply pins to minimize noise and improve stability. Typically, a 0.1μF ceramic capacitor is recommended.
Inquiry - 74HC00PW
