Share:
Specifications
SKU: 11249616
| Parameter | Symbol | Min | Typical | Max | Unit |
|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.0 | - | 5.5 | V |
| Input Low Voltage | VIL | - | 0.8 | - | V |
| Input High Voltage | VIH | - | 2.0 | - | V |
| Output Low Voltage | VOL | - | 0.1 | 0.4 | V |
| Output High Voltage | VOH | 2.4 | - | - | V |
| Propagation Delay Time (Typ) | tpd | - | 16 | - | ns |
| Power Dissipation | PD | - | - | 100 | mW |
| Operating Temperature Range | TA | -40 | - | 85 | °C |
Instructions for Use:
Power Supply:
- Ensure the supply voltage (VCC) is within the range of 2.0V to 5.5V.
- Connect VCC to the positive power supply and GND to the ground.
Input Signals:
- Apply input signals (VIL and VIH) that meet the specified voltage levels.
- Inputs should be driven by logic levels compatible with the 74AHCT family.
Output Signals:
- The output voltages (VOL and VOH) will be within the specified ranges.
- Ensure the load connected to the output does not exceed the maximum current ratings.
Propagation Delay:
- The typical propagation delay time (tpd) is 16 ns. This is the time it takes for the output to respond to a change in input.
Power Dissipation:
- The device can dissipate up to 100 mW of power. Ensure proper heat dissipation if operating near this limit.
Operating Temperature:
- The device is rated to operate between -40°C and 85°C. Avoid exposing the device to temperatures outside this range.
Handling:
- Handle the device with care to avoid damage from electrostatic discharge (ESD).
- Follow standard ESD protection procedures when handling and soldering the device.
Storage:
- Store the device in a dry, cool place to prevent moisture damage.
- Keep the device in its original packaging until ready for use.
Inquiry - 74AHCT08D
