Instructions for Use:

1. Supply Voltage:

   • Ensure the supply voltage (Vcc) is within the range of 4.5V to 5.5V to avoid damage to the device.

2. Input Levels:

   • High-level input voltage (VIH) should be at least 2.0V and can go up to 5.5V.
   • Low-level input voltage (VIL) should be no more than 0.8V.

3. Output Levels:

   • High-level output voltage (VOH) will be at least 2.4V and can be as high as Vcc - 0.1V.
   • Low-level output voltage (VOL) will be no more than 0.4V.

4. Current Ratings:

   • High-level input current (IIH) should not exceed 20.0μA.
   • Low-level input current (IIL) should not exceed 1.0μA.
   • High-level output current (IOH) should not exceed -20.0mA.
   • Low-level output current (IOL) should not exceed 24.0mA.

5. Propagation Delay:

   • The low to high propagation delay time (tPLH) and high to low propagation delay time (tPHL) are both in the range of 9.0ns to 22.0ns.

6. Power Dissipation:

   • The maximum power dissipation (PD) should not exceed 100.0mW.

7. Temperature Ranges:

   • The operating temperature (Toper) should be between -40°C and 85°C.
   • The storage temperature (Tstg) should be between -65°C and 150°C.

8. Handling:

   • Handle the device with care to avoid static discharge, which can damage the internal components.
   • Follow standard ESD (Electrostatic Discharge) precautions when handling and installing the device.

9. Mounting:

   • Ensure proper mounting and soldering techniques to avoid thermal stress and mechanical damage.
   • Use appropriate cooling methods if the device is expected to operate near its maximum power dissipation.

10. Testing:

    • Test the device under specified conditions to ensure it meets the required performance parameters.
    • Use compatible test equipment to avoid introducing noise or other disturbances that could affect the test results.