Share:
Specifications
SKU: 11251763
IC FLASH 4G PARALLEL 48TSOP I
| Parameter | Value/Description |
|---|---|
| Manufacturer | Micron Technology |
| Part Number | MT29F4G08ABAEAWP:E |
| Type | NAND Flash Memory |
| Density | 4 Gb (512 MB) |
| Organization | 16,384 Pages per Block, 2,048 Blocks |
| Page Size | 2,048 Bytes + 64 Bytes Spare Area |
| Interface | ONFI 2.2 (Toggle Mode 1.0) |
| Supply Voltage (Vcc) | 1.7 V to 1.95 V |
| Operating Temperature | -40°C to 85°C (Industrial Grade) |
| Data Retention | 10 years at 25°C |
| Endurance | 10,000 Program/Erase Cycles |
| Access Time | 25 μs (Typical) |
| Package | BGA (Ball Grid Array) |
| Dimensions | 16 mm x 12 mm x 1.2 mm |
| Pin Count | 63 Pins |
| RoHS Compliance | Yes |
Instructions for Use
Power Supply:
- Ensure that the supply voltage (Vcc) is within the specified range of 1.7 V to 1.95 V.
- Connect the Vcc pin to a stable power source and ground the Vss pins.
Initialization:
- After power-up, wait for the device to complete its internal initialization process. This typically takes less than 1 ms.
- Check the status register to ensure the device is ready for operation.
Command Sequence:
- Use the appropriate command sequences for read, write, and erase operations as defined in the ONFI 2.2 specification.
- For example, to read data:
- Send the Read command (00h).
- Provide the column address.
- Provide the row address.
- Read the data from the I/O lines.
Erase Operation:
- To erase a block:
- Send the Block Erase command (60h or D8h).
- Provide the row address of the block to be erased.
- Wait for the erase operation to complete by monitoring the status register.
- To erase a block:
Write Operation:
- To program a page:
- Send the Page Program command (80h).
- Provide the column address.
- Provide the row address.
- Write the data to the I/O lines.
- Send the Program Execute command (10h).
- Wait for the program operation to complete by monitoring the status register.
- To program a page:
Error Handling:
- Monitor the status register for error conditions such as ECC errors, write protect, and busy states.
- Implement error recovery mechanisms as needed.
Temperature Considerations:
- Operate the device within the specified temperature range (-40°C to 85°C) to ensure reliable performance and data integrity.
Storage:
- Store the device in a dry, cool environment to maintain data retention and prevent damage.
Handling:
- Handle the device with care to avoid physical damage and static discharge. Use proper ESD protection when handling the device.
For detailed information and specific command sequences, refer to the Micron MT29F4G08ABAEAWP:E datasheet and the ONFI 2.2 specification.
(For reference only)Inquiry - MT29F4G08ABAEAWP:E
