Instructions for Use:

1. Power Supply Connection:

   • Connect the input voltage to the "IN" pin.
   • Connect the output voltage to the "OUT" pin.
   • Ensure the ground is connected to the "GND" pin.

2. Capacitor Requirements:

   • Place a 0.33 μF capacitor between the input and ground to stabilize the input voltage.
   • Place a 0.1 μF capacitor between the output and ground to stabilize the output voltage.

3. Heat Dissipation:

   • For high current applications, ensure adequate heat sinking to prevent overheating.
   • The thermal resistance (θJA) should be considered when designing the heat sink.

4. Short-Circuit Protection:

   • The regulator has built-in short-circuit protection, but it is recommended to use external fuses or circuit breakers for additional safety.

5. Thermal Shutdown:

   • The device will automatically shut down if the temperature exceeds the safe operating range to prevent damage.

6. Mounting:

   • Ensure proper mounting to a heatsink if operating at high currents or in high ambient temperatures.

7. Storage:

   • Store the device in a dry, cool place within the specified storage temperature range to avoid damage.

8. Handling:

   • Handle with care to avoid damaging the pins and the internal components. Use appropriate ESD (Electrostatic Discharge) precautions.