Share:


KBPC5010 50 a 1000 v square full bridge rectifier bridge, the bridge pile of bridge Four feet

Specifications

SKU: 11265672

BUY KBPC5010 50 a 1000 v square full bridge rectifier bridge, the bridge pile of bridge Four feet https://www.utsource.net/itm/p/11265672.html

Parameter Value
Part Number KBPC5010
Type Full Bridge Rectifier
Maximum Average Forward Rectified Output Current (IF(AV)) 50 A
Maximum Repetitive Peak Reverse Voltage (VRRM) 1000 V
Maximum RMS Voltage (VRMS) 707 V
Maximum Non-Repetitive Peak Surge Current (IFSM) 300 A (8.3 ms single half sine-wave)
Junction Temperature Range (TJ) -65°C to +150°C
Storage Temperature Range (TSTG) -65°C to +150°C
Operating Temperature Range (TA) -40°C to +125°C
Case Style Square Bridge
Lead Finish Tin (Sn)
Terminal Type Screw Terminals

Instructions for Use:

  1. Mounting:

    • Ensure the rectifier is mounted on a heatsink to dissipate heat effectively.
    • Use thermal compound between the rectifier and the heatsink to improve thermal conductivity.
  2. Electrical Connections:

    • Connect the input AC voltage to the two input terminals (AC1 and AC2).
    • Connect the positive output terminal (DC+) to the positive side of your load.
    • Connect the negative output terminal (DC-) to the negative side of your load.
  3. Handling:

    • Handle the rectifier with care to avoid damage to the leads or the device itself.
    • Avoid exposing the rectifier to excessive mechanical stress or vibration.
  4. Thermal Management:

    • Monitor the temperature of the rectifier during operation to ensure it does not exceed the maximum junction temperature of 150°C.
    • If the rectifier becomes too hot, reduce the load or improve cooling.
  5. Storage:

    • Store the rectifier in a dry, cool place away from direct sunlight and extreme temperatures.

Pin Configuration:

Pin Description
AC1 Input AC Terminal 1
AC2 Input AC Terminal 2
DC+ Positive DC Output Terminal
DC- Negative DC Output Terminal

Notes:

  • Ensure that the rectifier is properly insulated to prevent short circuits.
  • Follow all safety guidelines when working with high voltages and currents.
(For reference only)

 Inquiry - KBPC5010 50 a 1000 v square full bridge rectifier bridge, the bridge pile of bridge Four feet