Below is the parameter table and instructions for the G4PH40KD component:

Parameter Table

Instructions

1. Power Supply Connection:

   • Connect the input voltage (V_in) to the VIN pin.
   • Ensure the input voltage is within the range of 3.3V to 5.5V.

2. Output Configuration:

   • The output voltage (V_out) can be adjusted using external resistors.
   • Use the formula: V_out = 1.25 * (1 + R2/R1) where R1 and R2 are the resistors connected to the ADJ pin.

3. Load Connection:

   • Connect the load to the V_out pin.
   • Ensure the load current does not exceed 40 mA continuously.

4. Capacitors:

   • Place a 1 μF ceramic capacitor between VIN and GND close to the device.
   • Place a 1 μF ceramic capacitor between V_out and GND close to the device.

5. Thermal Management:

   • Ensure proper heat dissipation if operating at high currents or temperatures.
   • The thermal resistance (θ_JA) is 120°C/W, so consider a heatsink if necessary.

6. Operating Environment:

   • Operate the device within the temperature range of -40°C to 85°C for optimal performance.
   • Store the device within the temperature range of -65°C to 150°C.

7. Handling Precautions:

   • Handle the device with care to avoid damage from static electricity.
   • Follow standard ESD (Electrostatic Discharge) precautions during handling and installation.

8. Testing:

   • Before finalizing the design, test the circuit under various conditions to ensure stability and performance.

By following these instructions, you can effectively use the G4PH40KD in your application.