Share:
Specifications
SKU: 11271011
| Parameter | Symbol | Min | Typ | Max | Unit | Description |
|---|---|---|---|---|---|---|
| Input Voltage | V_IN | 2.7 | - | 5.5 | V | Operating voltage range |
| Output Voltage | V_OUT | - | 3.3 | - | V | Fixed output voltage |
| Output Current | I_OUT | - | 500 | - | mA | Maximum continuous output current |
| Quiescent Current | I_Q | - | 1.0 | - | μA | Typical quiescent current |
| Dropout Voltage | V_DO | - | 0.5 | - | V | Typical dropout voltage at 500mA |
| Load Regulation | - | - | 0.5 | - | % | Change in output voltage with load |
| Line Regulation | - | - | 0.1 | - | % | Change in output voltage with input |
| Ripple Rejection | - | 60 | - | 80 | dB | Attenuation of input ripple |
| Operating Temp | T_OP | -40 | - | 85 | °C | Operating temperature range |
| Storage Temp | T_STG | -65 | - | 150 | °C | Storage temperature range |
| Package | - | - | - | - | SOT-23-5 | Package type |
Instructions for Using G4PC50UD
Power Supply Connection:
- Connect the input voltage (V_IN) to the positive terminal of the power supply.
- Ensure the input voltage is within the specified range (2.7V to 5.5V).
Output Connection:
- Connect the output voltage (V_OUT) to the load or circuit requiring the regulated 3.3V.
- The maximum continuous output current is 500mA.
Ground Connection:
- Connect the ground (GND) pin to the common ground of the system.
Capacitors:
- Place a 1μF ceramic capacitor close to the input pin to stabilize the input voltage.
- Place a 1μF ceramic capacitor close to the output pin to stabilize the output voltage.
Thermal Management:
- Ensure adequate heat dissipation, especially when operating at high output currents.
- The device can operate up to 85°C, but performance may degrade at higher temperatures.
Storage:
- Store the device in a dry environment within the temperature range of -65°C to 150°C.
Handling:
- Handle the device with care to avoid damage to the pins and package.
- Follow ESD (Electrostatic Discharge) precautions to prevent damage to the device.
Testing:
- Test the device under typical operating conditions to ensure it meets the required specifications.
- Measure the output voltage and current to verify proper operation.
By following these instructions, you can ensure reliable and efficient operation of the G4PC50UD low-dropout linear regulator.
(For reference only)Inquiry - G4PC50UD
