Share:
Specifications
SKU: 11278559
RS1J Fast Recovery Diodes 600V 1A 1.3V 250nS SMA/DO-214AC marking RS1J fast recovery rectifier
| Parameter | Description | Value |
|---|---|---|
| Part Number | RS1J | - |
| Type | Surface Mount Resistor | - |
| Resistance | Nominal Resistance | 100Ω, 1kΩ, 10kΩ, etc. |
| Tolerance | Resistance Tolerance | ±5% |
| Power Rating | Maximum Power Dissipation | 0.125W (1/8W) |
| Operating Temp | Operating Temperature Range | -55°C to +125°C |
| Case Size | Physical Dimensions | 0603 (1608 metric) |
| Material | Resistor Body | Ceramic |
| Termination | End Caps | Tin-Lead (SnPb) or Tin (Sn) |
| Compliance | RoHS Compliance | Yes |
| Packaging | Tape and Reel | - |
Instructions for Use
Handling:
- Handle the RS1J resistor with care to avoid damage.
- Use appropriate ESD (Electrostatic Discharge) protection when handling.
Soldering:
- Preheat the PCB to 100-120°C before soldering.
- Use a soldering iron with a temperature setting between 300-350°C.
- Apply solder to the pad first, then place the resistor and reflow the solder.
- Ensure the solder joints are smooth and free of voids.
Mounting:
- Place the resistor on the PCB according to the design layout.
- Ensure the resistor is aligned correctly and securely attached to the PCB.
Inspection:
- Visually inspect the solder joints for proper wetting and absence of shorts.
- Use a multimeter to verify the resistance value and ensure it matches the specified tolerance.
Storage:
- Store the resistors in a dry, cool environment to prevent moisture absorption.
- Keep the resistors in their original packaging until ready for use.
Testing:
- Test the assembled PCB to ensure the resistor is functioning correctly within the circuit.
- Check for any signs of overheating or failure during operation.
Disposal:
- Dispose of any defective or unused resistors in accordance with local environmental regulations.
Inquiry - RS1J
