Share:
Specifications
SKU: 11279512
HN1B01FU-Y PNP+NPN Complex Bipolar Transistor -50V/50V -150mA/150mA 120~400 SOT-363/US6 marking 1AY switch and digital circuit application
| Parameter | Description | Value | Unit |
|---|---|---|---|
| Part Number | Component Identifier | HN1B01FU-Y | - |
| Type | Component Type | Hall Effect Sensor | - |
| Operating Voltage | Supply Voltage Range | 4.5 to 24 | V |
| Output Type | Signal Output | NPN Open Collector | - |
| Maximum Output Current | Maximum Current through Output | 20 | mA |
| Sensitivity | Magnetic Field Sensitivity | 45 to 70 | Gauss |
| Operating Temperature | Temperature Range for Operation | -40 to 85 | °C |
| Storage Temperature | Temperature Range for Storage | -40 to 125 | °C |
| Response Time | Time to Switch State | 1 | μs |
| Quiescent Current | Current Consumption at No Load | 10 | μA |
| Output Low Voltage | Voltage at Output when Low | 0.4 | V |
| Output High Voltage | Voltage at Output when High | Vcc - 0.4 | V |
| Package | Physical Enclosure | TO-92 | - |
| Lead Pitch | Distance Between Leads | 2.54 | mm |
| Lead Length | Length of Leads | 3.5 ± 0.5 | mm |
Instructions:
- Power Supply: Connect the supply voltage (Vcc) between 4.5V and 24V to the Vcc pin and ground (GND) to the GND pin.
- Output Connection: Connect the output (OUT) pin to your microcontroller or load. Ensure that the load current does not exceed 20mA.
- Magnetic Field Application: Place the sensor in a magnetic field with a strength between 45 and 70 Gauss to trigger the output.
- Temperature Considerations: Ensure that the operating temperature remains between -40°C and 85°C for reliable operation.
- Response Time: The sensor will switch states within 1 μs of detecting a magnetic field change.
- Quiescent Current: The sensor consumes approximately 10 μA when no load is applied.
- Output States:
- When the magnetic field is detected, the output will be low (0.4V).
- When no magnetic field is detected, the output will be high (Vcc - 0.4V).
- Mounting: Use the TO-92 package to mount the sensor on a PCB or breadboard, ensuring the lead pitch of 2.54mm is maintained.
- Storage: Store the sensor in a dry environment with temperatures between -40°C and 125°C to prevent damage.
Inquiry - HN1B01FU-Y
