Instructions for Use:

1. Mounting Orientation: Ensure the capacitor is mounted with the correct polarity. The positive lead should be connected to the higher potential terminal.
2. Soldering Temperature: Do not exceed 260°C for more than 10 seconds during soldering. Allow the component to cool naturally.
3. Voltage Rating: Do not exceed the rated voltage of 50V. Continuous operation at voltages above this can lead to failure.
4. Temperature Range: Operate within the temperature range of -55°C to +85°C to ensure reliable performance.
5. Storage: Store in a dry environment to prevent moisture absorption, which can affect performance.
6. Handling: Handle with care to avoid mechanical stress or damage to the leads.
7. Capacitance Tolerance: The capacitance value may vary by ±20%. Design circuits to accommodate this tolerance.
8. Dissipation Factor: The dissipation factor is 0.010 (Max), indicating low energy loss.
9. Insulation Resistance: The minimum insulation resistance is 10,000 MΩ, ensuring high dielectric strength.
10. Ripple Current: The maximum ripple current is 230 mA. Exceeding this can cause overheating and reduce lifespan.